In recent years, we may be familiar with mortar spraying machines. It is widely used in spraying walls on various construction sites. Quick mortar spraying machines are mainly composed of driving devices, rotor assemblies, air systems, spray systems, electrical control systems, etc Partial composition. Today we will briefly introduce these parts.
1. The driving device is installed and connected to one end of the machine by a motor and a cycloid reducer. The motor spraying machine is directly installed on the reducer and is parallel to the axis of the rotor and the stator.
Mortar spraying machine rotor
2. The rotor assembly is made of special alloy material and subjected to high-temperature quenching and modulation treatment. The stator is generally made of special rubber material to improve wear resistance, strength and reduce maintenance workload.
3. The air system uses an electric motor to drive the air compressor to produce high-pressure air pressure. After that, it passes through the safety valve, pressure limiting valve, and is supplied to the spray gun.
Mortar spraying machine wear-resistant slurry pipe
4. The spraying system is the most important system of the mortar spraying machine. It consists of a conveying hose and a spray gun. Generally, a wear-resistant slurry pipe is used for the conveying hose, and the spray gun is made of polymer materials. The spray gun is fixed on the spray gun by a mortar pipe, an air pipe and an air valve.
Mortar sparying machine electrical control system
5. The electrical control system consists of automatic air leakage switch, AC contactor, thermal relay and start and stop buttons, which can effectively protect against leakage, excessive current and short circuit.
